inicio productos Anillo de retención para taladro

Anillo de retención para taladro

  • Marca:

    T, TGR, XDM, OEM como requisito

  • Breve:

    Anillos "E", arandelas de seguridad, GB896, DIN6799, Q430, Q431

  • Superficie:

    Polishing;Anodize;Nickel,Zinc,Black,Tin,chrome,Silver plating,Heat treatment Point hardening,quenching hardening

  • Material:

    Acero inoxidable 304,316,316L, 410, Duplex2205,2507, Acero al carbono 4.8 / 8.8 / 10.9 / 12.9grade

  • Tamaño:

    M8-M72,Hecho a medida

  • MOQ:

    No dude en contactarnos para más información.
consulta ahora
Detalles de producto

Diámetro nominal d 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
H max 0.8 0.8 1 1 1 1 1 1 1 1 1 1 1 1 1
min 0.75 0.75 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94
d max 9.06 10.16 11.16 12.16 13.36 14.46 15.46 16.56 17.66 18.72 19.92 20.92 21.92 22.92 23.92
min 8.6 9.7 10.7 11.7 12.9 14 15 16.1 17.2 18.17 19.37 20.37 21.37 22.37 23.37
d1 min 1 1 1.2 1.2 1.5 1.5 1.7 1.7 1.7 1.7 2 2 2 2 2
Diámetro nominal d 24 25 26 28 30 31 32 34 35 36 37 38 40 42 45
H max 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.5 1.5 1.5 1.5 1.5 1.75 1.75 1.75
min 1.14 1.14 1.14 1.14 1.14 1.14 1.14 1.44 1.44 1.44 1.44 1.44 1.69 1.69 1.69
d max 26.32 27.32 28.32 30.6 32.6 33.9 34.9 37 38.3 39.3 40.3 41.3 44.4 46.4 49.4
min 25.69 26.69 27.69 29.85 31.85 33.15 34.15 36.25 37.55 38.55 39.55 40.55 43.11 45.11 48.11
d1 min 2 2 2 2 2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5
Diámetro nominal d 47 48 50 52 55 56 58 60 62 63 65 68 70 72 75
H max 1.75 1.75 2 2 2 2 2 2 2 2 2.5 2.5 2.5 2.5 2.5
min 1.69 1.69 1.93 1.93 1.93 1.93 1.93 1.93 1.93 1.93 2.43 2.43 2.43 2.43 2.43
d max 51.6 52.6 55.3 57.3 60.3 61.3 63.3 65.3 67.3 68.3 70.3 73.6 75.6 77.6 80.3
min 50.04 51.04 53.74 55.74 58.74 59.74 61.74 63.74 65.74 66.74 68.74 72.04 74.04 76.04 79.04
d1 min 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 3 3 3